Painting these with the hardware on can be tedious so I wanted to show you the proper way to pry the hardware off. Using a very small flat head screw driver wedge in from an opening from the bottom. You never want to work it from the top because you don't want to dent the most visible surface. Use a lever motion and they should pop out pretty easily. Do not loose them! they are hard to find and in the same metal sheen.
Do not pry from the ends of the "T" you will have to hammer the metal flat again if you do.
Sometimes, like on this dresser I removed all of them except for one! So if only a couple is making you pry a little harder and you feel you may bend it to hard. Leave it alone knowing you got most off and tape this puppy.
No comments:
Post a Comment